[认证企业第3年] 指数:3
狭缝涂布工艺是在一定压力下，将稳定的、定量的涂布液由料流输送系统经过模头入料口输送至模头型腔内，再通过模头内部岐管或型腔均匀分配到模头的整个宽度范围，沿模具开口缝隙挤出并转移到基材表面上。模头是狭缝涂布的关键部件，超高的模头精度，是确保涂布均匀性的关键因素。The slot coating process is to transport a stable and quantitative coating liquid under a certain pressure from the material flowsystem to the die head cavity through the die head inlet, and then evenly distribute it to the entire width range of the die headthrough the internal manifold or cavity of the die head. It is extruded along the die opening gap and transferred to the surface ofthe substrate. The die head is a key component of slit coating, and the ultra-high precision of the die head is a key factor in ensuringcoating uniformity.
狭缝涂布工艺的特点◎涂膜速度高、膜厚一致性好◎涂布液粘度适用范围广◎涂布缺陷少，涂布液利用率高◎可同时进行两层或三层涂布
加工制造能力◎Maximum machinable size: 3000mm;◎Die head materials can be selected: 17-4, 316L, 2507, C276, SUS630, etc;◎Roughness of flow channel surface: ≤ Ra0.025;◎The requirements for straightness and flatness can reach: ≤ 3 μ M/m.◎可加工尺寸：3000mm◎模头材质可选择:17-4、316L、2507、C276、SUS630等◎流道面粗糙度：≤Ra0.025◎直线度和平面度要求可达：≤3μm/m
